Interior Gauges (boost etc)

Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JamesGT

Well-known member
Joined
Mar 28, 2012
Messages
493
Reaction score
0
Location
Grays, Essex
Afternoon All,

Im looking into getting 3 gauges for the Twingo, Boost, Volt and oil/water temp (not sure exactly yet).

If anyone knows..... are they easy to wire? or am i thinking this is easier then it will turn out to be if i go ahead with it.

Also, would it be expensive to get a 3 hole pod made for the pillar between the windscreen and driver's door.

As i say, this is just something im looking into, if things seem ok, i will move onwards with doing it.
 
if you're able to work fiberglass that's easy to do, i mean hole on the pillar, i'm doing it for tweeters
 
You can buy universal multi gauge A Pillar mounts easily, just screw or bond on.
I'm no turbo aficionado but I'm sure the Boost gauge is plumbed into the turbo's actuator line on a Tee piece.

If you've wanting oil temp/pressure, you'd be better looking into a sandwich plate that bolts inbetween your block and oil filter.
Water temp's easy enough too. Revotec make hose take offs that include threaded sections for temperature sensors.

Get a Demon Tweeks motorsport Catalogue sent to you, they're free :)
 
get a scanguage... all of the temps and pressures are on there and you can set it up to show what ones that you want... runs straight in from ECU and gives you live data
 
Well i was looking into some Greddy parts and i found this and it looks quite interesting Multi D/A gauge you can make the combo oil/water temp + boost gauge and i have to say looks sexy as hell :D

16001700_TurboDial02.jpg

16001701_OilDial.jpg


https://www.greddy.com/products/electronics/multi-da/
 
GhostZ":akklm1wm said:
singlespeed":akklm1wm said:
Or the STACK revcounter - https://www.stackltd.com/st700.html#street

Maybe with a 0-8K dial unless your fitting a bike engine in the boot :cool:
product_st700.png

if it is the same diameter as the original RPM gauge if it easy to swap that would be awesome :D
It wouldn't fit in the original pod due the the wire harness sticking out the rear of the unit :(
 
Top