Just how hard is wrapping?

[JamesGT]

Morning all!

After a long weekend pondering on bits and bobs for the GT, looked into getting the fogs, mirrors and spoiler done by pro's wrapped in white. Now.. they wanted £210, so my only option is to do it myself as that price made me laugh there and then, he didn't see the funny side.

How difficult would it be if i was to get a load of white 3m, is there a nack to it, or is it really straight forward.

Thanks

James.

 

[scott133]

That's quite expensive I'm having my mirrors, fog surrounds, spoiler and some of the interior done tomorrow for £150

 

[maggi200]

Depends on the material used and how much his time is worth. Why would he charge you £10 an hour if he could be charging £££££+++ for some Ferrari owner (if that's his market). Business is business. Sometimes people either have to say no or price people out as its not worth it. Tbh the smaller bits are fiddly and it's not exactly easy to just jump into and get perfect first time out. Takes time and concentration.

 

[JamesGT]

I understand im not going to be able to match the standard myself, im just not forking out that amount for what seems like a small amount of work, i mean it was £30 each fog and each mirror then £90 for the spoiler (which i can understand).

Just curious as to people's previous expereinces and if its something that you should steer clear when doing yourself.

 

[maggi200]

I've done it. Practice and it gets easier for sure, my first attempt was okay but not great. My second I was happy with. Depends on the price you can afford to loose on a possible first attempt etc

 

[JamesGT]

Well i would love a nice looking finish as im sure everyone would, it seems as though the best option would maybe be to get some 'cheap' material and have a practice and a fiddle to get the feel of how its done before i move onto the more expensive stuff and my pride and joy.

 

[Matt]

A cheap material will show in the results. The company in question are most likely using a top grade 3M or Hexis film. The price includes the material, the time taking off said parts (if required), prepping them and then the labor of course.

It does seem a little steep, but it's not unreasonable to be honest. Have a look around and you'll probably find another local company who will beat the price.

 

[JamesGT]

Thanks Matt.

I understand there is reason for the price, just i cannot justify it on something thats not too important.

Will decide weather to shop around or DIY

Thanks again guys

 

[tommy89]

I had a few goes at the front number plate bit and the lower grille, at first it was very tricky but then i got some great advice on here.

I'm sure you know this, but just incase, make sure you heat up the vinyl while using it. this make it stretch. (that may well have just been me being a bit thick not knowing that in the first place)

since then I have wrapped my stereo surround on the twingo and various bits on the mrs's clio.

certainly worth a go as all it costs me was a fiver

*EDIT* oh! also, I used a flocked wrap to wrap the boot here -> post84497.html?hilit=vinyl#p84497

got this done with cheaper than 3m vinyl--- finish is very smooth.

 

[Chicken]

Just wrapped my fuel cap in about 1 minute so it's easy to do and cost me nothing for materials.

 

[JamesGT]

That is brilliant ! i may have to do this later on with the cadbury wrapper.

 

[Twingojoe]

Sorry but that looks ridiculous haha

i am also curious as i have a large sheet of carbon wrap that i wantbto use for the front bumper bit.

Where the hell do i start? How does number plate come off? Then once off stick the wrap on and then use a stanley to trim it off??

 

[tommy89]

Sorry but that looks ridiculous haha

i am also curious as i have a large sheet of carbon wrap that i wantbto use for the front bumper bit.

Where the hell do i start? How does number plate come off? Then once off stick the wrap on and then use a stanley to trim it off??

im guessing your number plate is held on with sticky fixers if there are no screws, just pull it and ease it off with something flat

I roughly cut the wrap to the shape of the number plate bit, leaving extras to wrap around the edges. then stick it on bit by bit, using heat (a hairdryer) to mold sections into place by stretching it.
I used a stanly knife to trim... but others may not like this approach as it may leave scratches under the wrap.. . or in my case... you may slip and lop a chunk off your finger

 

[Chicken]

Sorry but that looks ridiculous haha

I don't care. It took one minute to do, was free and can take it of whenever I want

 

[maggi200]

I love it! I want some for mine. Might use a mountain dew can though. Just a bit of tape to hold it on?

 

[Chicken]

I love it! I want some for mine. Might use a mountain dew can though. Just a bit of tape to hold it on?

ooooo giving me ideas now

 

[maggi200]

I just did a spot of wrapping too

 

[Chicken]

We're gonna be trend setters mate you wait next month every car will have these mods

 

[Araf]

I just did a spot of wrapping too

Tell me you're not driving about like that! :shock:

 

[maggi200]

Is something wrong?