removing wheel arch liner urgentt !

scotth133 · Feb 21, 2012

im about to change my fogs to leds and just wanted to know how you remove the liners in the wheel arch to get to the foglights?.

cheers

maggi200 · Feb 21, 2012

You don't.

Undo the screw at the bottom directly under the lamp pull it back and pop your hand in. Might he easier with the wheels on full lock

5 min job

scotth133 · Feb 21, 2012

okayy maggi thanks, just the one single screw yes ?.

singlespeed · Feb 21, 2012

maggi112":27x16udv said:
You don't.

Undo the screw at the bottom directly under the lamp pull it back and pop your hand in. Might he easier with the wheels on full lock

5 min job

5 mins :shock: You must have small hands and bendy arms as the r/h side is a right pain to get at due to the washer reservoir.

Two screws at the bottom ( and one partway up the outside edge of the wheel arch makes it a bit more movable)

scotth133 · Feb 21, 2012

have you got a picture of these too aid please ?

maggi200 · Feb 21, 2012

True, I'm slim. But I felt there was plenty of space Neil. I didn't look on here just went out unscrewed the screws you described, moved the flap backwards and hooked it out the way and went for it.

scotth133 · Feb 21, 2012

disaster ordered the wrong fogs could anybody send me a link to the fogs that i need, managed to get the old ones oput tho, thanks for the help !?.

maggi200 · Feb 21, 2012

H7 fog lamps is it not?

scotth133 · Feb 21, 2012

could you get me a link because when i put it into ebay all that comes up are the two pronged bulbs ..?

maggi200 · Feb 21, 2012

Apologies. I thought they were h7 but appears that's wrong. I bought mine off here and that's what I was told they were and as they matched what I was replacing I saw no need to question it

Monster Detail · Feb 21, 2012

I changed my fogs in about 20 minutes. Pretty easy job. I don't think I fully removed the arch lining, though; just loosened it enough to gain access (there's a few screws in the arch that need to be removed).