RS133 caliper clearances

Shop deals on ebay
shop deals on amazon
Advertise with us
Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
singlespeed

singlespeed

Well-known member
Joined
Feb 6, 2011
Messages
6,385
Reaction score
2
Location
Moray
If anyone has their wheels off a 133 and has a steel rule or calipers handy, please could you measure the clearances of the calipers on the attached drawing.

Idealy with new(ish) pads in as that will change dimension 'A'. If there worn, just mention how much pad is left.


Ta ;)

Edit -
Front caliper.
A - 18mm
B - 108mm measured to the retaining spring ears
C - 53mm
D, E - 20mm radiused corner

Rear - More than enough clearance to prevent any chance of fouling
 

Attachments

  • BRAKE SPEC SHEET.jpg
    BRAKE SPEC SHEET.jpg
    94 KB
I may have time to do this this week, but my pads are nearing the point I will replace them. What thickness is the material usually?
 
maggi112":7wojv8y8 said:
I may have time to do this this week, but my pads are nearing the point I will replace them. What thickness is the material usually?
Click to expand...

From the Pagid online catalogue which now shows the CN0 Twingo,
Front pad thickness - 18.3mm including the friction material and backing plate
Rear pad thickness - 15.2mm including the friction material and backing plate
 
Top