Silly Question?

Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Courtney

Well-known member
Joined
Apr 13, 2011
Messages
2,133
Reaction score
0
Changed my 501s today, they were led already but changed them to cree ones with advice :) they are great!

i also got some ultra white h4's, but to change them, do i have to unscrew the little holder? havnt had to change them before and i cant find my book :S

:-D
 
Should be able to unclip the black plastic cover, you'll then see the inner headlight assembly. Unconnected the plug from the rear of the headlight. There is then a metal clip holding the bulb in place. Fidly to remove just be patient!!

When you replace the bulb make sure that the replacement sits correctly in the holder. (remember how the original looked in the space) There's usually 3 ridges on the bulb and a flat edge on the bulb. It shouldn't turn or twist in the hole if the ridges are in the right place.

Then reattach clip, plug. An make sure there aren't any hot spots of light. Maybe against a garage door or something.
 
do i have to unscrew anything? i just looked and it sort of makes sense what you say, but it doesn't want to work unless i unscrew it?
 
just worked it out :) then it started to rain so i will try and get them done tomorrow :)
 
Top