Twingo GT

ingham_95 · May 6, 2015

Hi guys, just bought a Twingo GT with 10k on the clock, I've been looking at the basics like exhaust and induction but also a remap, can anyone suggest what they think this remap may bring the 0-60 down too? And also the best place for bumpers etc, I feel the GT styling is a little flat

Universe · May 7, 2015

8.5 seconds give or take id say with a remap, I'm sure lads here have been around the 8 mark, only Elia that have made bumpers etc for the twingo or you can look at members cars for tips there's some beautiful cars about

charlie46 · May 8, 2015

Hello and welcome!

Dubz · May 8, 2015

Welcome!

Performance wise there's a few things you can do. The best would be to drop some 182 or megane 225 injectors in there then you can safely have around 130+bhp with an induction kit, exhaust (with or without a decat), larger FMIC, and a remap.

Also some wider alloys, possibly new poly-bushes in the main suspension components, and solid top mounts.

For visual mods the best would be putting some wind alloys, rear diffuser (kam racing sell one) and a cup spoiler with an obvious 40mm drop from coilovers.

Dubz · May 8, 2015

Welcome!

Performance wise there's a few things you can do. The best would be to drop some 182 or megane 225 injectors in there then you can safely have around 130+bhp with an induction kit, exhaust (with or without a decat), larger FMIC, and a remap.

Also some wider alloys, possible new poly-bushes in the main suspension components, and solid top mounts.

For visual mods the best would be putting some wind alloys, rear diffuser (kam racing sell one) and a cup spoiler with an obvious 40mm drop from coilovers.