Central ArmRest

Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
you don't need to take the seats out at all in the twingo!



Sorry just seen your comment, my seats stayed in yeah :)
 
Friedchicken91":2qlmdehp said:
jra3d":2qlmdehp said:
Your gonna turn into a Sunday afternoon driver chicken!
I'm gunna be an angry chicken when I see you

Angry chickens are just funny, we have 6 chickens :p

Edit: example, angry chicken in a basket on the way to a vets
qepe4ave.jpg
 
Lukefreeman":r5od289e said:
Just to confirm, it's part no 7711419669?

Cheers
That's the part number for the black colored armrest.
Was looking around on these forums and it seems like it's easy to install. Found one at a great price online and went ahead and ordered one, maybe I'll show some pictures once it's installed. Not sure if it's allowed to link to stores, but if anybody is interested at getting it at a much cheaper rate than Renault or other retailers, find it here: https://www.ricambinuovi.com/store/_uk/RENAULT/RENAULT/poggiabraccio_centrale_7711419669/642
 
davidtylen":skkc7bvh said:
Lukefreeman":skkc7bvh said:
Just to confirm, it's part no 7711419669?

Cheers
That's the part number for the black colored armrest.
Was looking around on these forums and it seems like it's easy to install. Found one at a great price online and went ahead and ordered one, maybe I'll show some pictures once it's installed. Not sure if it's allowed to link to stores, but if anybody is interested at getting it at a much cheaper rate than Renault or other retailers, find it here: https://www.ricambinuovi.com/store/_uk/RENAULT/RENAULT/poggiabraccio_centrale_7711419669/642

Defo get some pictures once you’ve got it and installed, seems a good price!
 
I got it installed :) Pretty easy as described in this topic. Make sure to follow the Renault instructions. I tried to cut out the least carpet as possible which was a bit of a hassle, but everything fits very nicely. Also, the supplier delivered the armrest with the wrong screws. Luckily I still had some, need 4mm screws in the front and 3.5mm in the rear. All in all it took me about 1.5 hours.

Tricky parts: getting the front mount on requires it to partly fit under the handbrake assembly, which is a bit tricky. With a screwdriver I was able to bend the metal parts of the handbrake assembly, fitted the mount and bended the metal parts back with the screwdriver and hammer. Also, my 10mm didn't fit as the metal the washer is attached to is quite long, but was able to do it using the 10mm socket and a flathead screwdriver to turn it.

Pic here: https://ibb.co/jCzEGo

Will still look for some protective material for the seatbelt holders as I think it'll scratch the armrest badly sooner or later.
 
Top