LARGE SELECTION OF NEW TWINGO 133 PARTS FOR SALE

[twingonuts]

Hi All,

I recently made a very silly decision and bought a large job lot of new RS Twingo parts from an ALPINE RENAULT distributor here in the UK. I am going to be putting a lot of it to use on my car however I have a load of brand new parts that I simply don't need, hence this advert. Below is a list of some of the components I'm going to be selling to try and back some money back on this investment. Due to the how many parts there are I'll post picture on request, so feel free to ask if you are interested. (Seemed silly posting 100+ picture online for no reason).

- LH Rear Caliper
- RH Rear Caliper
- 3 X LH Front Caliper
- 1 X RH Front Caliper
- 1 X RH Front Caliper NEW but missing the spring clip
- 4 X Set of Carbon Lorraine Front Brake Pad 2-RC6 4042-2rc6 (Twingo Spec)
- 2 X Set of Carbon Lorraine Front Brake Pad RC5+ 402-ROOB (Twingo Spec)
- 6 X Set of Carbon Lorraine Rear Brake Pad RLT05 4180RLT05 (Twingo Spec)
- BERINGER - HYDROLIC HANDBRAKE BIAS VALVE
- LH FRONT HUB
- RH FRONT HUB
- LHD STEERING RACK (NO TIE RODS) KOYO
- LHD STEERING RACK (COMPLETE with inner tie rods) KOYO
- STEERING COLUMB WITH MOTOR AND CONTROLLER
- PAIR OF LOWER WISHBONES WITH BALL JOINT (The correct RS 133 versions)
- BRAND NEW GEARBOX, STILL IN SHIPPING BOX
- REDUCED FINAL DRIVE KIT
- BONNET
- 2 X PASSENGER SIDE FRONT WING
- RADIATOR & FAN ASSEMBLY
- ECU + KEY
- THROTTLE PEDDLE ASSEMBLY
- FUEL FILLER NECK
- 2 X TWISTED DOGBONE MOUNT
- 2 X STANDARD DOGBONE MOUNT

If you have any questions, let me know

Cheers

 

[Cup RS 133]

Hi interested in the rad & the twisted dogbone, also a rear tail gate catch and both front door lock if u have them. Are the twisted dogbones for the gt or have they revised the crappy rs ones cheers, mines an rs cup no aircon if that makes a difference with the rad cheers Dan.

 

[twingonuts]

Hi Dan,

I'll PM you some pictures and part numbers for the Rad and dogbones. Unfortunately I don't have any of the door locks.

Cheers
Rob

 

[Cliocraig]

How much for the pair of front calipers and do u have a steering wheel?

 

[twingonuts]

I'll PM you some pictures and details on the calipers.

Cheers
Rob

 

[twingonuts]

Sorry, forgot to say. Unfortunately I don't have a steering wheel available. I actually need one myself haha.

 

[Cup RS 133]

Hi again sorry for the delay in response, but is the rad definitely for the rs not the GT, have you still got the lower wishbone arms how much were you thinking for them cheers

 

[twingonuts]

Hi,

All of the parts I have are from an ex R1 twingo team and hence they are all for the Twingo RS 133, which the R1 was based on. The below link should show you the rad assembly and lower arms so you can take a look yourself

https://www.dropbox.com/sc/f7hv757izad6xft/AACd0-FtUtJzEbOcJWLSMpzia

If you're interested, send me an offer over PM and we can work something out

Cheers
Rob

 

[Cup RS 133]

I'd like to make an offer but don't want to insult you so if you give me a ball park figure I'll see what I can do cheers

 

[twingonuts]

PM'd you..

 

[Jamess156]

What parts have you got left mate?

 

[twingonuts]

PM me what you need. I have more than the parts I listed, so I should still have what ever you need.

 

[babybluemaxer]

How much for the pair of lower arms please?

 

[Cliocraig]

Hi bud just got ur pm (not been on for a while)
I dodged up my steering wheel for just now lol) but I'm after a rear right (drivers side) caliper if u still have 1 could u pm me the price plz
Craig

 

[TrickyDick]

You've got a pm.

 

[Dsign]

how much for the final drive kit?

 

[TrickyDick]

Not responding to several PM, anyone knows why?