new seats!

Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

scottl5690

Active member
Joined
Apr 2, 2012
Messages
39
Reaction score
0
here is cupple of pics of mazda rx8 seats in my gt,
been such an errfor to get them in there n tbh a pain to do
i have havent got any pics during but only the final product :)
IMAG0235.jpg

IMAG0233.jpg
 
They look amazing. Fancy putting some in mine for me?
 
They look darn fine. Only ever sat in so dodgey pornstar red rx8 seats but they were spot on
 
They look nice, but now it´s time to change your door panels and other plastics for dark grey ones as these bright coloured really look awful ... :D
 
Friedchicken91":1ghczwta said:
They look amazing. Fancy putting some in mine for me?
lol it was such a pain to do im never fitting any seats to any other car lol but id gladly try to explain what i did lol
 
waitey":b4s3affl said:
Looks good.

How are they with new MOT regulations?
well i work for a ford main dealers and the mot tester said they will
be fine as to pass mot the seat has to move in two places, for example the back ajusts n the seat slides forward n back, but at the moment my air bag light is on what is mot fail. but that will soon be sorted :)
 
maggi112":3o8zumjj said:
Looks nice. Any issues fitting?
not as such, i was just a pain modifying the runners as they
were no where near they needed to be!



maggi112":3o8zumjj said:
Have you stopped the light coming on with a resistor then?
no not at the moment iv ordered a restor kit off ebay so that should do the job :)
 
scottl5690":1k475z7a said:
mot tester said they will
be fine as to pass mot the seat has to move in two places, for example the back ajusts n the seat slides forward n back

Seemingly, that's not strictly true.
There was a clause in the MOT Regs that basically said if the seat didn't have a fore/aft adjustment or a back adjustment, then these features couldn't be assessed but did not constitute a fail.

I will have to dig out the exact wording as it was in the most recent issue of Banzai, they clarified the changes in regs and some "loop holes" (if you want to call them that) that are quite often misinterpreted.

Same with harnesses, provided it has either an E Mark or confirmed FIA/Motorsport Organisation body Homologation and no tears or frays, they can pass an MOT.

ANYWHOO, seats look awesome dude :) need to darken the doorcards etc now though :)
 
waitey":kllgsho4 said:
Scott how did you mount them?
sorry fore late reply, air bag light is now out too! :) lol
i used the omp subframes i ordered them on yb raceing only cost £116 deliverd
basicly cut down any extra backets on seats i didnt need
then mounted the seats to subframes, but as it wasent high enough i used
box section in between to give some lift, i could try n explain in detait idf needs be or
put some pics up?
 
madmatt":3iyohgzh said:
scottl5690":3iyohgzh said:
mot tester said they will
be fine as to pass mot the seat has to move in two places, for example the back ajusts n the seat slides forward n back

Seemingly, that's not strictly true.
There was a clause in the MOT Regs that basically said if the seat didn't have a fore/aft adjustment or a back adjustment, then these features couldn't be assessed but did not constitute a fail.

I will have to dig out the exact wording as it was in the most recent issue of Banzai, they clarified the changes in regs and some "loop holes" (if you want to call them that) that are quite often misinterpreted.

Same with harnesses, provided it has either an E Mark or confirmed FIA/Motorsport Organisation body Homologation and no tears or frays, they can pass an MOT.

ANYWHOO, seats look awesome dude :) need to darken the doorcards etc now though :)

the seats should still get a pass tho thats all im botherd about lol, my mot is due in about a months time, i myt get is in early when i get paid, but first hids need to be removed cause i deffo wont get an mot with them
 
Top