• If you have bought, sold or gained information from our Classifieds, please donate to Twingo Forum and give back.

    You can become a Supporting Member or just click here to donate.

OMP Twingo Subframes - GU7 - £180 for pair

Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Matt

Well-known member
Joined
Oct 28, 2010
Messages
2,575
Reaction score
0
Location
Guildford, Surrey
Up for grabs here is a pair of OMP Subframes designed specifically for the Twingo.

Once fitted, this will provide the basis of fitting OMP and many other bucket seats into your Twingo. This will allow for side mounted seats, base mounted seats or even sliding rails to be fitted directly into you Twingo securely. OMP don't supply fittings with these but I bought spares so brand new nuts/bolts/etc will be chucked in, including four large eyelets that screw straight into your rear seatbelt mounting points for 4-point harnesses (standard 7/16" eyelets are too small for this).

Both are perfectly fine condition with under a years use and minimal scratches which aren't seen after installation.

These cost me £131.28 each but I am selling the pair for £180.

Please PM me any questions.

omp-seat-frame-hc-875.jpg
 
Yep seats are being used in my mx5 buuuut you could buy the same seats for £130 each, these subframes and voila... Buckets for £420 ;)
 
No worries, good luck :)

Can't believe nobody else wants buckets.. This works out at half the price of original!
 
Price drop, 160 quid for the pair... Need these gone.

Can confirm that these will fit all MK2 Twingos and all of the OMP seat range as well as most other popular seat brands.
 
can you do any better than 160? there on ebay for 71.48 each, i know im being cheeky lol i dont need the harnes mounts i only need the base plates thanks scott
 
Holy crap they've come down in price a lot! That's almost half of what I paid!

I'll see what I can do regarding pricing and send your a pm fella.
 
Just looked on your progress and saw, was the back seats not in use or could you get in the back with that style seat?
 
I had OMP TRS seats which I now use in the mx5. They could be side mounted (more expensive but more adjustability) or base mounted straight onto these. With both you can attach sliders or even tilt and slides whic h would allow access to the back.

I had rear seats removed because of the way I ran harnesses but it's not required.
 
Okay cheers, sounds tempting to get some bucket seats! But even though these would be a bargain it wouldnt be the end of buying for them :(
 
Top