oscar
Well-known member
- Joined
- Aug 31, 2013
- Messages
- 2,601
- Reaction score
- 2
as you can see below it's in a well used condition but it still works as new. it's sat on the manifold heat shield and has been scorched and oddly enough the little beauty has only taken a small burn mark (this won't be visible if you position it burn side down) note that these retail for £180-£250 new.
makes a great induction roar, and opens up the sound of the turbo. loud suction noise! you know when you've hit boost.
i also took some measurements for perspective buyers so that you can get the required piping for it to route it however you should wish and these are as follows :
inlet inner ring diameter - 88.8mm (3.49'')
inlet outer ring diameter - 112.0mm (4.4'')
outlet (silver pipe that gets clamped into your intake pipe) - 67.5 (2.65'')
pictures :
makes a great induction roar, and opens up the sound of the turbo. loud suction noise! you know when you've hit boost.
i also took some measurements for perspective buyers so that you can get the required piping for it to route it however you should wish and these are as follows :
inlet inner ring diameter - 88.8mm (3.49'')
inlet outer ring diameter - 112.0mm (4.4'')
outlet (silver pipe that gets clamped into your intake pipe) - 67.5 (2.65'')
pictures :
