What have you just ordered?

Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Brembo hc discs
Ferodo DS2500 pads
Goodridge braided brake lines
ATE 5.1 super racing blue fluid
Brembo rear shoes
 
Jjay":1187p74b said:
Brembo hc discs
Ferodo DS2500 pads
Goodridge braided brake lines
ATE 5.1 super racing blue fluid
Brembo rear shoes
Sounds nice and cheap lmao ;-)
 
lgonzalez":2r2f9tqg said:
Jjay":2r2f9tqg said:
Brembo hc discs
Ferodo DS2500 pads
Goodridge braided brake lines
ATE 5.1 super racing blue fluid
Brembo rear shoes
Sounds nice and cheap lmao ;-)

Psshhttt of course Lewis, jan/feb is gonna be worse though :-(
 
133_Ads":ar41tt4f said:
Just ordered two new front tyres, gone for Maxxis 195/45s got some good reviews, brake discs off kam racing and searching for green stuff pads, wanted ds2500s but cant find them for any less than 180! :/

I went for the maxxis just to see how they do, not one to believe forum chatter :p and I'm impressed for the price. They're very good and progressive, high levels of grip and good wet weather performance and wearing far slower than the continentals
 
- New front bumper details for the Wind (the ones I painted white) for 52€ instead of 70€ at Renault.. going to bring them to B&C Design for wrapping.

- Black side indicators.

& this afternoon I'm going to check out some ICE upgrades ;)
 
'Oredered' the removal of the centre silencer tomorrow.

Getting a few mods in place before I consider some '402 cams
 
Needed more cleaning gear...... ordered:
Sonus SFX pads 1, 2, 3 and 4
Sonus buffer thingys x2
2x 55g basics of bling clay bars
Poor Boys SSR 2.5
3M tape (25mm and 38mm)
Sonus SFX-3 final finish polish
Chemical Guys VRP (interior cleaner)
Dodo born slippy


and last week my Das-6 pro turned up :D
 
JamesGT":339c5pxp said:
Needed more cleaning gear...... ordered:
Sonus SFX pads 1, 2, 3 and 4
Sonus buffer thingys x2
2x 55g basics of bling clay bars
Poor Boys SSR 2.5
3M tape (25mm and 38mm)
Sonus SFX-3 final finish polish
Chemical Guys VRP (interior cleaner)
Dodo born slippy


and last week my Das-6 pro turned up :D
Awesome! What size pads u using?
 
JamesGT":2lxnga2r said:
Needed more cleaning gear...... ordered:
Sonus SFX pads 1, 2, 3 and 4
Sonus buffer thingys x2
2x 55g basics of bling clay bars
Poor Boys SSR 2.5
3M tape (25mm and 38mm)
Sonus SFX-3 final finish polish
Chemical Guys VRP (interior cleaner)
Dodo born slippy


and last week my Das-6 pro turned up :D
Awesome! What size pads u using?
 
the_notorious_C_A_T":33sufu2h said:
Ordered some coilovers. That's about it recently.
which ones have you gone for? I'm looking for some with a decent ride and handling, so not harsh and crashy
 
Going in on a group buy over on Clio197.net for a sprint booster :) if anyone else wants one (£150 delivered as opposed to around £190) get on it, there is still time ;-)
 
singlespeed":11c7u2ms said:
the_notorious_C_A_T":11c7u2ms said:
Ordered some coilovers. That's about it recently.
which ones have you gone for? I'm looking for some with a decent ride and handling, so not harsh and crashy

KWs? Pricy but they are known to have good kits.

I was going to look at APs when i finally get my 133 as they're well priced and APs also get very good reviews
 
waitey":2c8iqr91 said:
singlespeed":2c8iqr91 said:
the_notorious_C_A_T":2c8iqr91 said:
Ordered some coilovers. That's about it recently.
which ones have you gone for? I'm looking for some with a decent ride and handling, so not harsh and crashy

KWs? Pricy but they are known to have good kits.

I was going to look at APs when i finally get my 133 as they're well priced and APs also get very good reviews

Went for bc's as I have had them before when I had my starlet and they seemed good quality, better the devil you know! And they come with new top mounts as well.

And with the bc's the spring rate doesn't change as I had ap's on my fiesta before my meister r's and you put more tension on the spring the lower you go. Not that I thought the ap's are bad at all, just my reasoning for going for bc's!

Although being honest if Meister r made for the twingo I would have went for them but they don't lol
 
the_notorious_C_A_T":itqnmps0 said:
waitey":itqnmps0 said:
singlespeed":itqnmps0 said:
the_notorious_C_A_T":itqnmps0 said:
Ordered some coilovers. That's about it recently.
which ones have you gone for? I'm looking for some with a decent ride and handling, so not harsh and crashy

KWs? Pricy but they are known to have good kits.

I was going to look at APs when i finally get my 133 as they're well priced and APs also get very good reviews

Went for bc's as I have had them before when I had my starlet and they seemed good quality, better the devil you know! And they come with new top mounts as well.

And with the bc's the spring rate doesn't change as I had ap's on my fiesta before my meister r's and you put more tension on the spring the lower you go. Not that I thought the ap's are bad at all, just my reasoning for going for bc's!

Although being honest if Meister r made for the twingo I would have went for them but they don't lol
your reasoning is prety much the same as mine. I've checked all the clio 182 cup and 133 fitments and was erring towards the BC's or AST ones, as they both have seperate spring pre-load and height adjustment. So they shouldn't be as compromised a single platform which probably comes with a stiff spring.

Shame about the Meisters as they were also on my 'look into' list
 
JE_GT":j2696ibe said:
MovingShadow":j2696ibe said:
Weitec? :p (I know you don't like them)

Weitec, AP, KW, all the same products just different colours.
More or less yes but once you start with the KW v2, v3 or clubsport you'll notice a difference. If it fits on your car ofcourse.
 
Top