133_Ads Twingo RS *Will be soon going :'(*

[133_Ads]

We sell Dodo Juice Mellow Yellow Wheel Cleaner (available as a ready-to-use spray or as a concentrate). It's very effective at removing caked on brake dust.

Could be getting in touch with you at the end of the week about that then

Any wheel sealant (E.g Poorboys Wheel Sealant)?

PB wheel sealant is alright, but not that durable, in my opinion.

I'd highly recommend Dodo Juice Supernatural Hybrid as a wheel sealant. It's extremely durable, very easy to use and leaves a really nice finish.

We also have Dodo Juice Supernatural Acrylic Spritz, which can offer over 3 months of protection, despite it being a simple spray on/buff off product.

Ok mate i'll be in touch with you later in the week about it

 

[Monster Detail]

We sell Dodo Juice Mellow Yellow Wheel Cleaner (available as a ready-to-use spray or as a concentrate). It's very effective at removing caked on brake dust.

Could be getting in touch with you at the end of the week about that then

Any wheel sealant (E.g Poorboys Wheel Sealant)?

PB wheel sealant is alright, but not that durable, in my opinion.

I'd highly recommend Dodo Juice Supernatural Hybrid as a wheel sealant. It's extremely durable, very easy to use and leaves a really nice finish.

We also have Dodo Juice Supernatural Acrylic Spritz, which can offer over 3 months of protection, despite it being a simple spray on/buff off product.

Ok mate i'll be in touch with you later in the week about it

No problem, mate. Just send me an email ([email protected]) or PM when you're ready.

 

[maggi200]

Which APC do you do Matt? It seemed similar to G101 in pretty much every way, do you have a price in bulk?

And And we need to see pics of whatevers going on asap!

 

[133_Ads]

Haha you'll see them all on Saturday big things

 

[Monster Detail]

It's still our own, available in 1 litre plastic jerrycan-style bottles. And yes, it's similar to G101 but not the same.

 

[Monster Detail]

If you tell me what sort of quantity you're after, I can sort a price out for you.

 

[Monster Detail]

Sorry for invading your thread, Ads. Keep up the good work.

 

[133_Ads]

Right, said i was going to update this the other day, been caught up a lot recently!

Bought a few things but only managed to fit one so far!

Also biggest disappointment was that i had it booked in for a Re-Map, turned up and the ecu wouldn't allow us to do it, the software was saying there was a block on the ecu, so i need to get in touch with the person who had it before me to see if he can tell me what he done to it! i know there was a cup spoiler on there as the boot shows signs of where its been rubbing

Pictures of newly fitted things soon! Hopefully this weekend!

 

[weebob]

Right, said i was going to update this the other day, been caught up a lot recently!

Bought a few things but only managed to fit one so far!

Also biggest disappointment was that i had it booked in for a Re-Map, turned up and the ecu wouldn't allow us to do it, the software was saying there was a block on the ecu, so i need to get in touch with the person who had it before me to see if he can tell me what he done to it! i know there was a cup spoiler on there as the boot shows signs of where its been rubbing

Pictures of newly fitted things soon! Hopefully this weekend!

Where did you go for the mapping?

 

[133_Ads]

Went to a local company to me, and he was puzzled, so he rang someone from Blackpool way (can't remember the name) and he told him he's had it before when maps have been taken off the ecu in the past

 

[weebob]

Went to a local company to me, and he was puzzled, so he rang someone from Blackpool way (can't remember the name) and he told him he's had it before when maps have been taken off the ecu in the past

Probably motorsport developments.

Have a run up to RS tuning in leeds.

 

[133_Ads]

Righttt then finally been able to do two things I've been wanting to get done, done!

Firstly the twingo found its self in this situation...

I then took the bolts out for the undertray and the inner arches and found this piece of plastic that is not needed

So that was swiftly and forcefully removed (yes I snapped the clip...)

Whilst at it the H11 HIDs I got off Kev (CarbonFanatics) found their way onto the floor... (Please excuse the sideways pic)

Bolted up and ready for the wires to be tidied!

Comparison!

Didn't get chance to take any others as my battery died will try and get some tomorrow! Showing both headlights and foglights!

 

[N0ddie]

Don't know if you noticed but someone has half inched yer front wheels lol.

This car has made me remove the big decals from our red 133. Looks so much better without them.

 

[133_Ads]

Don't know if you noticed but someone has half inched yer front wheels lol.

This car has made me remove the big decals from our red 133. Looks so much better without them.

Yeah I know! Raised it on the ramps turned my back for two mins and they'd gone! :O

Really? I've only got the small Renault Sport decals on the door, not looking at removing them though

Few more pictures in a minute

 

[133_Ads]

Tonights mission started with the mirrors looking like this

So these could 'mate'

Which after a few hours together ended like this

And then they found their way back onto the car

And also while I was at it I thought I'd show the sidelights, headlights and foglights All off CarbonFanatics!

Sidelights

Headlights

Foglights

Headlights & Foglights

Just a 'few' pics

Cars really dirty at the moment so no daytime pics of the mirrors

 

[N0ddie]

You need some of that back to black for your grey black plastics around the mirror base.

 

[133_Ads]

I know, when I got it from the dealership they'd polished the bloody plastics!

 

[BlackTwingo-i]

Ive got polish on mine :/ how do you get it off!!!?

 

[133_Ads]

It's a bigger to get off, think ill give back to black a try, if not then ill find something

 

[BlackTwingo-i]

No it doesnt cover it :/ its imbedded invetween the tiny nipple things!!

Need to gently scratch it out with your nail maybe.. Its right at the top in the groove on my side strip, so ide have to take them off, but i dont want to break them!